AQUALINE GAMA SERIES REVERSE OSMOSIS SYSTEMS
from 150 m3 / day to 1650 m3 / day

Reverse osmosis is the process of filtering with a membrane to obtain pure water, which separates all unwanted minerals from the water applied in waters in which conventional purification systems are insufficient (sea water, high conductivity water, wells, etc.). This process continues until osmotic equilibrium is reached. Reverse osmosis is the reversal of this osmotic flow. Aqualine reverse osmosis systems successfully ensure that clean water is obtained as a result of this process. In addition, Aqualine reverse osmosis systems can be manufactured in a variety of design styles according to customer requirements.

STANDARD CHARACTERISTICS

Membrane vessels FRP
TFC spiral membranes with a diameter of 8 "
AISI304 or AISI316 vertical centrifugal pump with a high pressure stainless steel
ST-37 epoxy coated carbon steel or AISI304 stainless steel
cartridges with 5 micron precision cassette
Line low pressure U-PVC PN16
line high pressure AISI304 Stainless steel
Inlet electrically operated throttle valve
Pressure regulating control valves at the pump outlet and waste water line
Low and high pressure switch
Flow meters for water and waste water
Glycerin manometers 0
cmS Water indicator
Product pH meter (optional)
Automatic rinsing, automatic rinsing and dry washing system PLC
on / off switch
and operator panel
380 V / 50Hz / 3ph
IP56 control panel
Recommended inlet water limits

Inlet water TDS: 0 - 2000 ppm
Operating pressure: between 10 and 15 bar
Inlet water pressure: 2 to 5 bar
If the hardness is more than 3 French dosages ASC is required.
pH range: 6 - 8
Tolerance of silica (SiO2): 25 ppm max. @ 60% efficiency
Max. Inlet water temperature = 30º C Max.
Maximum tolerance of iron (Fe): 0.05 ppm, if ASC is dosed 0.2 ppm
Hydrogen sulphide should not be.
No turbidity (NTU <1)
SDI <5
Microbiological contamination must be removed